Vermeer 504R Classic Baler
Balers 504R Classic Baler
Overview:
Only put up a limited number of bales a year? The Vermeer 504R Classic baler is designed for part-time operators who want good value in a dependable baler. A wide pickup and optional bale shape sensors make baling easier and with minimal setup and adjustments required, you’ll feel like you’ve been baling with it foreve... + Read More
Features
CAMLESS PICKUP
The Vermeer camless pickup comes standard on the 504R Classic baler. Built with fewer moving parts, this camless pickup allows you to get the job done when you have time to put up hay and minimize parts cost when it is time for routine maintenance.
ATLAS CONTROL SYSTEM
The Atlas™ control system delivers robust performance in a simple and intuitive package. A 4.3-in (10.9-cm) color touchscreen displays everything you need to bale and allows operators to enter field statistics to track bales per hour and average bale size. Optional features include ability to see bale shape on the display as well as real-time moisture readings.
LOW RECOMMENDED PTO HORSEPOWER
Tractors just don’t run balers. That is why we designed a baler to fit your tractor. With a low recommended PTO horsepower of 50 hp (37.3 kW), the 504R Classic will run with most part-time operators' tractors.
3-YEAR PICKUP WARRANTY
Operators can rest assured with a 3-year pickup warranty covering internal components and parts and labor on the 504R Classic baler. Does not include teeth or hardware for teeth.
OPTIONAL NETWRAP SYSTEM
Using netwrap helps to reduce hay loss compared to twine and keep the shape and structure of your bales during storage.
Specifications
| BALE SIZE | |
| Bale Diameter | 36 in - 60 in (91.4 cm - 152.4 cm) |
| Bale Width | 47 in |
| Maximum bale weight | 1000 lbs |
| DIMENSIONS AND WEIGHTS | |
| Length standard | 156 in |
| Length with net | 173 in |
| Length with ramp | 169 in |
| Height | 107 in |
| Width with standard tires | 100 in |
| Tires | Standard - 11L-15; Optional - 31 x 13.5-5 |
| Weight fully optioned | 5260 lbs |
| BALE FORMING CHAMBER | |
| Drive Roller Size | 4.78 in (12.1 cm) |
| Idler roller size | 3.5 in (8.9 cm) |
| Start Roller Size | 4.5 in |
| Belt Type | Standard mini rough top |
| Number of Belts | 5 |
| Width of Belt | 6.8 in |
| Length of belt (long) | 465.5 in |
| Length of belt (short) | 455.5 in |
| Type of Lace | Alligator rivet |
| DRIVE SYSTEM | |
| Driveline | 540 rpm, standard lube, radial pin clutch |
| Torque protection pickup | Radial pin clutch |
| Roller chains | Single 60 |
| Bearing and Sprocket Configuration | Round drive shafts and bearings |
| TRACTOR REQUIREMENTS | |
| PTO horsepower minimum | 40 hp |
| PTO horsepower recommended | 50 hp |
| PICKUP | |
| Pickup type | Camless wide |
| Width tooth to tooth | 60 in |
| Tooth Bars | 4 |
| Number of Teeth | (48) double steel coil |
| Teeth spacing | 2.83 in (7.2 cm) |
| Stripper bands | Steel |
| Flotation | Optional gauge wheels 4.8-16 HD semi-pneumatic with spring assist |
| Pickup Lift | Manual standard, hydraulic optional |
| 3-year pickup warranty | Standard |
| CONTROL SYSTEM | |
| Control system type | Atlas™ control system |
| Display | 4.3 in (10.9 cm) color touch screen |
| Field Statistics | 10 fields |
| Bale shape indicators | Optional |
| Moisture | Optional - up to 27% |
| Bales per hour | Standard |
| DENSITY | |
| Bale density adjustments | Standard manual through hydraulic relief valve |
| Density readings | Optional physical gauge |
| BALE TIE SYSTEM | |
| Twine system | Optional |
| Netwrap system | Optional |
| Net tension control | via mechanical adjustment |
| Extra roll storage | Standard |
| FEATURES | |
| Bale ramp | Optional spring-loaded |
| Fire extinguisher, safety chain | Optional |
