Vermeer 504 Pro Baler
Balers 504 Pro Baler
Overview:
It’s built to handle the demands of heavy, wet material and produce high-quality bales in a variety of materials. For operators who want pro performance for frequent silage baling, the 504 Pro baler sets the standard.
Features
HEAVY-DUTY DRIVE COMPONENTS
Heavy-duty drive components, from chains to bearings, to effectively and consistently handle heavy, dense silage bales.
HYDROFLEXCONTROL
Hydroflexcontrol allows the baler floor to flex up and down to minimize blockage in the pickup. Or, the operator can hydraulically open the floor from the cab to clear plugs and move material back into the chamber.
XTRACUT17 CHOPPER SYSTEM
Xtracut17 chopper system cuts the crop for better bale density, fermentation, silage quality and digestibility. The pre-cut crop also provides a consistent material for additions to rations fed using a mixer wagon.
E-LINK PRO MONITOR
The E-Link Pro monitor offers the ability to electronically adjust density control from the cab, collect and store comprehensive field and operation statistics, and more.
POWERSPLIT TRANSMISSION
Patented powersplit transmission provides a split gearbox design that controls belts and rollers separately from the rotor and pickup, to make better use of horsepower when baling heavy material.
Specifications
| BALE SIZE | |
| Bale Diameter | 36 in - 60 in (91.4 cm - 152.4 cm) |
| Bale Width | 48 in |
| Maximum bale weight | 2400 lbs |
| DIMENSIONS AND WEIGHTS | |
| Length standard | 196.1 in |
| Length with net | 196.1 in |
| Length with ramp | 196.1 in |
| Height | 115 in |
| Width with standard tires | 96 in |
| Width with optional tires | 112 in |
| Tires | Standard: 14L-16.1; Optional: 21.5L-16.1 flotation |
| Weight fully optioned | 8680 lbs |
| BALE FORMING CHAMBER | |
| Idler roller size | 9.6 in (24.4 cm), 6.6 in (16.8 cm) |
| Belt Type | Endless belts |
| Number of Belts | 4 |
| Width of Belt | 11.2 in |
| Length of belt (long) | 433.1 in |
| Type of Lace | No laces |
| DRIVE SYSTEM | |
| Driveline | 540 rpm, standard lube, cut-out clutch |
| Torque protection pickup | Radial pin clutch |
| Roller chains | 12B-1, 16B-1, 20B-1, 12B-2, 16B-2 |
| Bearing and Sprocket Configuration | Round drive shafts, greaseable roller bearings |
| TRACTOR REQUIREMENTS | |
| PTO horsepower minimum | 80 hp |
| PTO horsepower recommended | 110 hp |
| PICKUP | |
| Pickup type | Camless wide |
| Width tooth to tooth | 73 in |
| Width on outside flair | 78 in |
| Tooth Bars | 5 |
| Number of Teeth | (65) double steel coil |
| Stripper bands | Steel |
| Flotation | Pneumatic gauge wheels 16 x 6.5-8 with spring assist |
| Pickup Lift | Hydraulic |
| 3-year pickup warranty | Standard |
| CONTROL SYSTEM | |
| Control system type | E-Link Pro |
| Display | 7 in (17.8 cm) color touch screen |
| Field Statistics | 20 customers with 10 fields each |
| Field statistics download | USB |
| Bales per hour | Standard |
| DENSITY | |
| Bale density adjustments | Standard through control system monitor |
| Density readings | Physical gauge |
| BALE TIE SYSTEM | |
| Netwrap system | Standard |
| Net tension control | via mechanical adjustment |
| Extra roll storage | Standard |
| FEATURES | |
| Bale ramp | Spring-loaded |
| Grease bank | Standard |
| Automatic chain lube system | Standard |
| Right-hand door | Standard |
| Fire extinguisher, safety chain | Optional |
