Landoll 5531-40x7.5
5000 Series Grain drill 5531-40x7.5
Overview:
Seeding innovation is at its finest with the Grain Drill line-up from Landoll. Built tough to easily handle conventional tilled soil all the way to no-till conditions.
Features
- State of the Art Laser Cut and Robotically Welded Main Frame and Hitches
- Rigid Frames on 10', 12 1/2', 15' and 20' Models
- Front Folding Frames on 30' and 40' Models
- All Tires are in Front of Frame
- Row Units Raise Independently from Frame
- UHMW Pivots on Lift System
- Cat. III or Cat. IV Single Lip Hitches (Model Dependent)
- Pneumatic Down Pressure (Adjustable from 120 to 400 lbs.)
- Maintenance Free Pivots on Openers
- 15.8” x 3.5 mm Opener Blades
- Blades Configured “Heads Up” for Decreased Wear on Openers
- Poly Soil Hold Down Strips Clean Openers and Control Opener Blow-Out
- Planter Style Seed Drop Tubes
- Swivel Type Press Wheels with 2” x 13” Smooth or 3” x 13” Double Rib Tires
- 3.25 bu./ft. Grain Only Seed Box Capacity
- Grain with Small Grass: 2 bu./ft. Grain Capacity and 1.3 bu./ft. Small Grass Capacity (Convertible)
- Grain with Dry Fertilizer: 2 bu./ft. Grain Capacity with 105 lbs./ft. Fertilizer Capacity
- New Fluted Seed Meters
- Inline Box Design with 12 Degree Down and 15 Degree Flex
- Weight Package for Wings
- 11L x 15-12 Ply Tires for Rigid Models and Wings on Folding Models
- 380/55R x 16.5 Tires on Main Frame of Folding Models
- Slip-In Spindles in All Locations on All Models
- Monitor with Acre Meter, Seed Tube Flow Sensors, Bin Level Sensors
- On-Board 12 Volt Air Compressor
- Blue Powder Coat Paint
- LED Safety Warning Lights
Specifications
| Model | 5531-40x7.5 |
| Approximate Weight | 24,560 lbs. (11,140 kg) |
| Working Width | 40 ft. 0 in. (12.2 m) |
| Transport Width | 14 ft. 6 in. (4.4 m) |
| Opener Spacing | 7.5 in. (191 mm) |
| Number of Openers | 64 |
| Frame | 7 in. x 7 in. x 0.375 in. (178 x 178 x 9.5 mm) |
| Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
| Frame Type | Weighted Wing Frame |
| Hitch | Cat. IV Single Lip Cast Hitch |
| Hitch Tube | 10 in. x 6 in. x 0.375 in. (254 x152 x 9.5 mm) |
| Hitch Adjustment | Hydraulic Adjust with Parking Stand |
| Transport Lift System | UHMW Maintenance Free Lift Pivots |
| Tire Size (Main Frame) | (4) 380/55R x 16.5 |
| Wheel Hubs (Main Frame) | 8-Bolt |
| Spindles (Main Frame) | 3 in. (76.2 mm) Slip-In Spindles |
| Tire Size (Wing Frame) | (4) 11L x 15, 12 Ply |
| Wheel Hubs (Wing Frame) | 6-Bolt |
| Spindles (Wing Frame) | 2 in. (50.8 mm) Slip-In Spindles |
| Transport Wheel Mount | In Front of Openers |
| Drive Chain Mechanism | Ground Driven From Wing Wheels |
| Drive Chain | Enclosed #50 Chain |
| Row Unit Raise/Lower | Independent of Main Frame |
| Row Unit Type | Pneumatically Adjustable Down Pressure |
| Row Unit Adjustment Range | 120 to 400 lbs. (54 to 181 kg) |
| Disc Opener Type | Double Disc Openers |
| Disc Opener Style | Heads Up Alignment |
| Disc Type | Smooth |
| Disc Size | 15.8 in. x 0.1383 in. (400 x 3.5 mm) |
| Disc Bearing | #205 Bearing |
| Opener Pivots | Maintenance Free Pivot Points |
| Seed Tubes | Poly, Planter Type Seed Tubes |
| Opener Tenders | Flat Spring Backed Poly Soil Hold Strips |
| Press Wheels | Swivel Type |
| Press Wheel Sizes | 2 in. x 13 in. (50.8 x 330 mm) Smooth or 3 in. x 13 in. (76.2 x 330 mm) Double Rib |
| Hopper Construction | All Welded 14 ga. Steel |
| Hopper Design | In-Line with 12 Degree Down/15 Degree Up Flex |
| Hopper Lids | All Steel Formed Lids with Latches |
| Meter Type | Externally Fluted |
| Grain Hopper Capacity | 3.25 Bushel per Foot |
| Integral Folding Ladder | Standard |
| Integral Fold-Up Walk Boards | Standard |
| On-Board 12V Air Compressor | Standard |
| Monitor with Acre Meter, Seed Tube Sensors, Bin Level Sensors | Standard |
| Safety Warning Lights and SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Powder Coat Paint, Blue Sapphire | Standard |
| Hydraulic Row Markers | Optional |
| Point Row Clutches (Section Shut-Off) | Optional |
| Seed Plug | Optional |
| Seed Box Divider | Optional |
| Horsepower Requirements | 5 to 7 HP (4 to 5 kW) per Foot |
