Landoll 2430-13-24
2400 Series Weatherproofer (WPI) 2430-13-24
Overview:
Set it and forget it. That's right. With the ultra user-friendly WP1, manage your soil, water and residue all in a single tillage pass.
Features
- Laser Cut, Robotically Welded Frame
- 5 1/2” Lift Axles with Maintenance-Free Lift System
- Walking Tandems on All Sizes
- Slip-In Spindles
- 12.5L x 15-12 Ply, 380/55R x 16.5 x 12 Ply, 440/55R x 18 x 14 Ply Tires (Model Dependent)
- Self-Leveling Hitch
- Cast Single Lip Hitch Cat. IV (2 1/4” Hole)
- Single Point Depth Control
- 24” or 26” x 1/4” Disc Blades Spaced at 10 1/2”
- 15 Degree Gang Angle Front and Rear
- Heavy-Duty Scrapers
- 1 3/4” Gang Bolt
- Trunnion Mount Bearings
- C-Cushion Bearing Mounts
- Overlapping/Staggered Offset Tandem Disc Gangs
- Staggered Shank Arrangement
- Auto-Reset Shanks with 3,500 lb. Point Load
- Choice of Points with Integral Wear Strips
- Adjustment/Maintenance Wrenches
- Blue Powder Coat Paint
- Safety Warning Lights
Specifications
| Model | 2430-13-24 |
| Approximate Weight | 29,870 lbs. (13,549 kg) |
| Working Width | 26 ft. 0 in. (7.9 m) |
| Transport Width | 16 ft. 0 in. (4.9 m) |
| Transport Height | 14 ft. 0 in. (4.3 m) |
| Number of Disc Blades - Front | 32 |
| Number of Disc Blades - Rear | 34 |
| Blade Spacing - Front | 10 in. (267 mm) |
| Blade Spacing - Rear | 10 in. (267 mm) |
| Blade Sizes | 24 in. x 0.25 in. (610 x 6.4 mm) Rollable 24 in. x 0.25 in. (610 x 6.4 mm) 26 in. x 0.25 in. (660 x 6.4 mm) |
| Blade Concavity | 3 in. (76.2 mm) |
| Blade Scrapers | 4.5 in. (114 mm) Adjustable |
| Blade Scraper Mount | Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm |
| Gang Spools - Front | 5.5 in. (140 mm) Diameter |
| Gang Spools - Rear | 5.5 in. (140 mm) Diameter |
| Gang Angle | 15 Degrees Non- Adjustable |
| Gang Shaft | 1.75 in. (44.5 mm) Round |
| Number of Gang Bearings - Front | 10 |
| Number of Gang Bearings - Rear | 10 |
| Gang Bearing Type | C-Cushion Trunnion Mount, Greaseable Triple Lip Seals |
| Number of Shanks | 13 |
| Shank Spacing | 24 in. (610 mm) |
| Shank Depth (Maximum) | 16 in. (406 mm) |
| Shank Mounts | Semi-Wrap Around with 1 in. (25.4 mm) U-bolts |
| Point Load - Auto Reset | 3,600 lbs. (1633 kg) |
| Trip Height | 16 in. (406 mm) |
| Shank Size | 1.25 in. x 4 in. (31.8 x 102 mm) |
| Shank Type | Auto-Reset Parabolic |
| Standard Points | 2.375 in. (60.3 mm) V-Cap with Wear Guard |
| Frame | 8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 (153 x 102 x 9.5 mm) |
| Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
| Transport Lift Axles | 5.5 in. (140 mm) with UHMW Maintenance Free Pivots |
| Transport Axle Type | Walking Tandems with Greaseable Pivots |
| Tire Size - Main Frame | (4) 440/55R x 18-14 |
| Wheel Hubs - Main Frame | 8-Bolt |
| Spindles - Main Frame | 4 in. (102 mm) Slip-In Spindles |
| Tire Size - Wing Frame | (4) 12.5 L x 15 Hwy Service Tires (Load F) |
| Wheel Hubs - Wing Frame | 8-Bolt |
| Spindles - Wing Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
| Hitch Type | Self-Leveling with Manual Adjustment |
| Hitch Category | Cat. IV Single Lip with 2.25 (57.2 mm) Hole |
| Machine Depth Control | Single Point, Front Mounted |
| Safety Warnings Lights and SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Adjustment Wrenches | Standard |
| Powder Coat Paint, Blue Sapphire | Standard |
| Rear Jack | Standard |
| Cat. III Single Lip Hitch Clevis (2 in. Hole) | Optional |
| Cat. V Single Lip Hitch Clevis (3 in. Hole) | Optional |
| Shark Fin Point | Optional |
| 7 in. Wing Point | Optional |
| Spare Tire & Wheel Assembly | Optional |
| Horsepower Requirements | 40 to 50 HP (30 to 27 kW) per Shank |
