Landoll 2131-17 / NOT AVAILABLE
2100 Coulter Chisel 2131-17
Overview:
Manage heavy residue conditions at higher speeds with maximum efficiency with the Landoll 2100 Coulter Chisel.
Features
- Laser Cut, Robotically Welded Frame
- 5 1/2” Lift Axles with Maintenance-Free Lift System
- Walking Tandems on All Sizes Except 7- Shank Models
- Slip-In Spindles
- 12.5L x 15-12 Ply or 32/1550 x 16.5L Tires (Model Dependent)
- Self-Leveling Hitch
- Cast Single Lip Hitches Cat. III on 7 and 9 Shanks; Cat. IV on 11 Shanks and Larger
- Single Point Depth Control
- 22” Coulters with 7 1/2” Spacing Provides Each Shank with Leading Coulter
- Solid Cast Coulter Spools
- 1 3/4” Gang Bolt
- Trunnion Mount Bearings
- C-Cushion Bearing Mounts
- Auto-Reset Shanks with 32” Under Frame Clearance
- Rigid Shear Bolt Shanks with 32” Under Frame Clearance
- Choice of Straight or Twisted Points and Shovels
- Adjustment/Maintenance Wrenches
- Blue Powder Coat Paint
- Safety Warning Lights
Specifications
With Auto-Reset Shanks
| Model | 2131-17 |
| Approximate Weight | 20,844 lbs. (9,455 kg) |
| Working Width | 21 ft. 3 in. (6.5 m) |
| Transport Width | 16 ft. 1 in. (4.9 m) |
| Transport Height | 11 ft. 1 in. (3.4 m) |
| Number of Coulter Blades | 35 |
| Blade Spacing | 7.5 in. (191 mm) |
| Blade Size | 22 in. x 0.25 in. (559 x 6.4 mm) |
| Coulter Protection | Spring Cushioned/C-Flex |
| Blade Scrapers | Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm) |
| Blade Scraper Mount | C-Cushion Mounted |
| Gang Spools | 5.5 in. (140 mm) Diameter Solid Cast |
| Gang Shaft | 1.75 in. (44.5 mm) Round |
| Number of Bearings | 8 |
| Gang Bearing Type | C-Cushion Trunnion Mount, Greaseable Triple Lip Seals |
| Number of Shanks | 17 |
| Shank Type | Auto-Reset |
| Shank Spacing | 15 in. (381 mm) |
| Shank Mounts | Wrap-Around Design |
| Shank Arms | 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm) |
| Point Load - Auto Reset | 1,750 lbs. (794 kg) |
| Trip Height | 14 in. (356 mm) |
| Shank Size | 1.25 in. x 2.5 in. (31.8 x 63.5 mm) |
| Standard Shovels | 4 in. (102 mm) Twisted |
| Point Angle | 50 or 60 Degree |
| Shank Offset | 12 in. (305 mm) on Rear Bar |
| Under Frame Clearance | 32 in. (813 mm) |
| Frame | 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm) |
| Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
| Transport Lift Axles | 5.5 in. (140 mm) with UHMW Maintenance Free Pivots |
| Transport Axle Type | Walking Tandems with Greaseable Pivots |
| Tire Size - Main Frame | (4) 32/1550 x 16.5 SL |
| Wheel Hubs - Main Frame | 8-Bolt |
| Spindles - Main Frame | 3 in. (76.2 mm) Slip-In Spindles |
| Tire Size - Wing Frame | (4) 12.5L x 15, (GY-FI) |
| Wheel Hubs - Wing Frame | 8-Bolt |
| Spindles - Wing Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
| Hitch Type | Self-Leveling with Manual Adjustment |
| Hitch Category | Cat. IV Single Lip with 2.25 (57.2 mm) Hole |
| Machine Depth Control | Single Point, Front Mounted |
| Weight Kits Needed | With Attachment - 4 Required, Without Attachment - 1 Required |
| Safety Warning Lights and SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Adjustment Wrenches | Standard |
| Powder Coat Paint, Blue Sapphire | Standard |
| Rear Jack | Standard |
| Cat. III Single Lip Hitch Clevis (2 in. Hole) | N/A |
| Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) | Standard |
| Cat. V Single Lip Hitch Clevis (3 in. Hole) | Optional |
| 2 in. Straight Points | Optional |
| 2 in. Straight Points with Chrome Cap | Optional |
| 3 in. Twisted Shovels | Optional |
| Rear Hitch | Optional |
| Rear Hitch With Hydraulic Hoses | Optional |
| Spare Tire & Wheel Assembly | Optional |
| Horsepower Requirements | 20 to 30 HP (15 to 22 kW) per Shank |
With Rigid Shear Bolt Shanks
| Product Attributes | 2131-17 |
| Approximate Weight | 18,378 lbs. (8,336 kg) |
| Working Width | 21 ft. 3 in. (6.5 m) |
| Transport Width | 16 ft. 1 in. (4.9 m) |
| Transport Height | 11 ft. 1 in. (3.4 m) |
| Number of Coulter Blades | 35 |
| Blade Spacing | 7.5 in. (191 mm) |
| Blade Size | 22 in. x 0.25 in. (559 x 6.4 mm) |
| Coulter Protection | Spring Cushioned/C-Flex |
| Blade Scrapers | Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm) |
| Blade Scraper Mount | C-Cushion Mounted |
| Gang Spools | 5.5 in. (140 mm) Diameter Solid Cast |
| Gang Shaft | 1.75 in. (44.5 mm) Round |
| Number of Bearings | 8 |
| Gang Bearing Type | C-Cushion Trunnion Mount, Greaseable Triple Lip Seals |
| Number of Shanks | 17 |
| Shank Type | Rigid Shear Bolt |
| Shank Spacing | 15 in. (381 mm) |
| Shank Mounts | Wrap-Around Design |
| Shank Arms | 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm) |
| Trip Height | 14 in. (356 mm) |
| Shank Size | 1.25 in. x 2.5 in. (31.8 x 63.5 mm) |
| Standard Shovels | 4 in. (102 mm) Twisted |
| Point Angle | 50 or 60 Degree |
| Shank Offset | 12 in. (305 mm) on Rear Bar |
| Under Frame Clearance | 32 in. (813 mm) |
| Frame | 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm) |
| Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
| Transport Lift Axles | 5.5 in. (140 mm) with UHMW Maintenance Free Pivots |
| Transport Axle Type | Walking Tandems with Greaseable Pivots |
| Tire Size - Main Frame | (4) 32/1550 x 16.5 SL |
| Wheel Hubs - Main Frame | 8-Bolt |
| Spindles - Main Frame | 3 in. (76.2 mm) Slip-In Spindles |
| Tire Size - Wing Frame | (4) 12.5L x 15, (GY-FI) |
| Wheel Hubs - Wing Frame | 8-Bolt |
| Spindles - Wing Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
| Hitch Type | Self-Leveling with Manual Adjustment |
| Hitch Category | Cat. IV Single Lip with 2.25 (57.2 mm) Hole |
| Machine Depth Control | Single Point, Front Mounted |
| Weight Kits Needed | With Attachment - 4 Required, Without Attachment - 1 Required |
| Safety Warning Lights and SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Adjustment Wrenches | Standard |
| Powder Coat Paint, Blue Sapphire | Standard |
| Rear Jack | Standard |
| Cat. III Single Lip Hitch Clevis (2 in. Hole) | N/A |
| Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) | Standard |
| Cat. V Single Lip Hitch Clevis (3 in. Hole) | Optional |
| 2 in. Straight Points | Optional |
| 2 in. Straight Points with Chrome Cap | Optional |
| 3 in. Twisted Shovels | Optional |
| Rear Hitch | Optional |
| Rear Hitch With Hydraulic Hoses | Optional |
| Spare Tire & Wheel Assembly | Optional |
| Horsepower Requirements | 20 to 30 HP (15 to 22 kW) per Shank |
