Land Pride SB1051
SB10 Series Snow Blowers SB1051
Overview:
The SB1051 & SB1064 Snow Blowers remove snow from driveways, parking lots, and sidewalks in general residential areas. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as nee... + Read More
Features
| FEATURES | BENEFITS |
| Quality Comer Gearbox | Provides long life, durability construction. |
| Greasable bearings | Less drag and extends life of unit. |
| Adjustable 3-point hitch | Operator may set the distance between tractor and Snow Blower to his/her preference. |
| Quick Hitch compatible | Makes for faster and easier hook-up to tractor. |
| Large main housing | Ability to handle large drifts. |
| Large impeller diameter | The ability to move and throw material farther. |
| Guarded discharge chute | Guards against operator putting his or her hands into the impeller. |
| Options | |
| Bolt-on reversible lower wear bar |
Protects against wear on the auger housing and improves service life of the Snow Blower. The optional hardened steel wear bar last longer. |
| Gear driven chute rotator | Allows choice of three rotator options: manual drive, electric actuator, or hydraulic motor. |
| Shearbolt protected impeller and auger | Eliminates costly repairs. |
| Three skid shoe options | Multiple surfaces allows you to pick the correct skid shoe for your application. |
Specifications
| Model No. | SB1051 |
| Working Width | 51" |
| Overall Width | 52 3/4" |
| Weight without options | 400 lbs. |
| Tractor Horsepower | 18-32 HP |
| 3-Point Hitch & Category | Adjustable Cat. I |
| Quick Hitch Compatible | Yes |
| Main Housing Material | 12 gauge |
| Side Plate Material | 3/16" |
| Chute Opening At Base | 8" |
| Impeller Diameter | 20" |
| Impeller Housing Depth | 6" |
| Number of Impeller Blades | 4 |
| Auger Diameter | 14" |
| Number of Auger Paddles | 2 |
| Gearbox Oil Capacity & Type | 1.06 Pints of SAE90W Gearlube |
| Drive Chain | #60 RC |
| Driveline Category | Cat. ll, Shearbolt protected |
| Driveline Shearbolt | M8 x 50 C1.6.6 |
| Drive Shaft Shearbolt | 1/4" -20 Grade 5 bolt |
| Optional Equipment | |
| Lower Wear Bar Construction | Bolt-on, reversible, and replaceable full length lower wear bar Two options available: Hardened steel wear bar option or steel wear bar option |
| Weight | 11 lbs. |
| Outer Skid Shoe & Weight Outer Wear Bar & Weight Inner Skid Shoe & Weight |
Bolt-on, adjustable & replaceable (8 lbs) Bolt-on, adjustable & replaceable (14 lbs) In-board mounted on the rear, adjustable and replaceable (19 lbs) |
| Chute Rotation & Weight Manual Electric Hydraulic |
Gear & worm drive (10 lbs.) Gear drive (20 lbs.) Gear drive (12 lbs) |
| Deflector & Weight Manual Electric Hydraulic |
Locking bar (2 lbs.) Electric Actuator (25 lbs.) Hydraulic cylinder (32 lbs.) |
