Land Pride RCD1884
RCD18 Series Rotary Cutters RCD1884
Overview:
The RCD1884 is a smooth-top, offset cutter that performs best in grass-only applications. Being dual spindle, the cutter is shorter in length than single spindle 84" cutters; the reduced length allows for better maneuverability in tight spaces. The 10" offset makes the RCD1884 a good solution for applications that requ... + Read More
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 3 main driveline with 2-plate slip-clutch | 2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work. |
| Shock absorbing flex-coupler between main and side gearboxes | Protects intermediate drive shaft and side gearbox from hard objects in the blade path. |
| 10" Deck offset to the right | Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings and trees. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Fully welded 10 gauge deck | Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 11 5/8" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| 1/2/" x 4" Blade bar | Heavy-duty blade bar adds support to stump jumper and gearbox output shaft. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| Stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| Front and rear guarding | Protect against flying debris. Optional front rubber or single chain guarding. Standard rear metal band or optional rear extended metal guarding. |
| Optional 15" Laminated tailwheel 4" x 16' Molded rubber | Laminated material is long lasting in rough conditions and can't go flat. Can't go flat. |
Specifications
| Specifications & Capacities | RDC1884 Model |
| Machine Weight with: Dual Laminated Tailwheels Dual Solid Tailwheels |
900 lbs. 905 lbs. |
| Hitch | Category l with clevis type lower links and floating top linkage Quick Hitch adaptable |
| Cutting Width | 84" |
| Overall Width | 86 9/16" |
| Overall Length | 80 9/16" |
| Offset Distance to the Right | 10" |
| Deck Height at Rear | 11 5/8" |
| Cutting Height | 2" - 12" |
| Cutting Capacity | 1 1/2" Diameter |
| Recommended Tractor Power Take-Off Horsepower | 35-60 horsepower |
| Power Take-Off Speed | 540 rpm |
| Gearbox | 60 Hp main gearbox & 45 horsepower side gearbox With speed-up beveled gears, cast iron housing, and 1.67" output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity Main Gearbox Side Gearbox |
4.7 pints 3.5 pints |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge |
| Side Skirt Material Thickness | 10 Gauge |
| Skid Shoe Construction | 3/16" Weld-on with mounting holes for adding optional bolt-on replaceable shoes |
| Stump Jumper | 10 Gauge x 24" Round dish pan with 1" x 4" x 19 1/2" blade bar |
| Blades (4) | 1/2" x 4" x 16" Heat treated alloy steel free-swinging suction blades |
| Blade Overlap | 5" |
| Blade Bolts | Keyed with harden flat washers & lock nuts. |
| Blade Tip Speed | 11,693 fpm |
| Main Drive-line | ASAE Category 3 |
| Main Drive-line Protection | 2 plate slip clutch |
| Tailwheel Mount | Caster fork with 360 degree swivel |
| Tailwheel | Optional two 15" laminated tire or two 4" x 16" molded rubber tire. |
| Front Guard | Optional 4" x 6" molded rubber or single chain guard |
| Rear Guard | Standard metal band or optional metal extended guard |
