Gehl T650 / NOT AVAILABLE
Features
- 4-Post Canopy ROPS and FOPS Certified
- Proportional Auxiliary Hydraulics with Case Drain and Circuit Pressure Dump
- Hydrostatic 2-Speed Transmission
- Lift Arm Float Detent
- Inching Pedal
- Electronic Hand Throttle
- Digital Display with Audible and Visual Indicators
- Steering Column with Tilt and Extension Adjustments
- Cup Holder
- Differential Lock (Hydraulically Activated Front and Rear)
- Oscillating Front Frame
- Rubber Floor mat
- Power-A-Tach® Attachment Mounting System (EuroStyle, 4-Point & Skid Steer)
- Adjustable Arm Rest
- Seven-Way Adjustable Seat
- 12-Volt Socket in Arm Rest
- Telescopic Lift Arm With Z-Bar Bucket Linkage & Mechanical Self-Level
- Multi-Function Joystick
- Lift / Tilt Electronic Lockout Switch
- Reverse and Brake Tail Lights
- Master Electrical Disconnect Switch
- Articulation Locking Bar (conforms to SAEJ276)
- Horn
- Side View Mirrors
- Front, Rear & Boom Worklights
Specifications
Dimensions |
T650 | ||
---|---|---|---|
Height to Top of Cab / ROPS | 8’ 1” | ||
Width over Tires | 5’ 5” | ||
Length with Bucket on Ground | 17’ 10” | ||
Bucket Hinge Pin Height Retracted | 11' 5" | ||
Bucket Hinge Pin Height Extended | 14' 0" | ||
Maximum Dump Angle at Full Height | 45° | ||
Outer Turning Radius | 12' 7" | ||
Articulation Angle from Center | 40° | ||
Engine | |||
Make | Yanmar | ||
Model/Number of Cylinders | 4TNV98CT / 4 | ||
Power @ 2300 rpm | 65 hp | ||
Displacement | 202 cu. in. | ||
Load Capacities | |||
Static Tipping Load with Bucket Retracted | 6,641 lbs. | ||
Static Tipping Load with Bucket Extended | 3,808 lbs. | ||
Bucket Breakout | 11,004 lbs. | ||
Operating Weight with Bucket | 10,460 lbs. | ||
Hydraulics | |||
Work Hydraulic System Flow | 18.4 gpm | ||
Drive Hydraulic System Pressure | 6,100 psi | ||
Drive Hydraulic Reservoir Capacity | 19.5 gal. | ||
Other | |||
Battery | 12-volts | ||
Fuel Tank Capacity | 20 gal. | ||
Maximum Travel Speed | 7/12 mph | ||
Tire Size - Standard | 405 /70 20 |