Cub Cadet XT2 LX46 EFI / NOT AVAILABLE
XT2 Enduro Series XT2 LX46 EFI
Overview:
• The Cub Cadet XT2 LX46 EFI/FAB is powered by a Cub Cadet twin cylinder 679cc engine equipped with EFI for 25% less fuel consumption, less maintenance, dependable starting, and easy off-season storage.
• 46-inch fabricated, 11-gauge, twin blade deck with AeroForce deck design that optimizes airflow and maximizes suct... + Read More
Features
Incredibly Responsive Handling
Optimized command and control at every turn with hydrostatic transmissions. No more shifting. Just push the pedal and go.
New V-Twin EFI Engine
The new Cub Cadet 679cc twin EFI engine available on the XT2 LX46 and SLX50 packs high-performance power. Not to mention reduced maintenance and up to 25% less fuel consumption.
Corrosion Defense System
A multi-step process electronically applies automotive-grade corrosion resistance with meticulous care to protect against wear and tear.
Specifications
| Engine | |
| Engine Brand | Cub Cadet |
| Engine Model | w/ EFI |
| Engine Displacement | 679cc |
| Fuel Tank Capacity. | 2.5 gal |
| Cylinders/Material | Twin |
| Engine Start | Push Button start |
| Engine Oil Capacity | 2 qts |
| Lubrication | Fully pressurized |
| Charging System | 15 Amp Regulated |
| Fuel Gauge | Fuel sight window |
| Governor | Manual |
| Choke | Electronic |
| Air Filter | Single element |
| Oil Filter | Yes |
| Battery | |
| Battery | 12V 300 cold crank amps |
| Drive System | |
| Transmission | Hydrostatic, foot |
| Forward Speed | 5.5 MPH |
| Reverse Speed | 3.1 MPH |
| Rear Axle | 3/4" w/dual PM steel drive hubs |
| Transmission Housing | Cast aluminum |
| Transmission Type | Tuff Torq K46 |
| Engine to Transmission | Heavy-duty belt |
| Cutting Deck | |
| Deck Cutting Width | 46" |
| Cutting Modes | Discharge/mulch/bagging |
| Deck Wash | Included |
| Deck Material | Steel, 11-gauge |
| Deck Attach/Removal | QuickAttach™ (no tools required) |
| Deck Engagement (PTO) | Pull knob (electric) |
| Deck Construction | Stamped |
| Spindle Construction | 3/4" with steel cap and triple lip sealed |
| Blade(s) | 2 |
| Deck Lift | Lever |
| Cutting Height Range | 1" - 4" |
| Anti-Scalping | 4 ball |
| Deck Positions | 12 positions |
| Chassis | |
| Frame | Robotically welded |
| Front Axle | Cast iron |
| Turning Radius | 16" |
| Front Tires | 15"x6"-6" |
| Rear Tires | 20"x8"-8" |
| Tire Tread | Multi-Trac |
| Protection | Front Bumper |
| Rear Tow Hitch | Included |
| Corrosion Protection | E-coating |
| Controls | |
| Cruise Control | Included |
| Brakes | Automotive-style disc |
| Steering Control | Manual sector and pinion |
| Display | Hour meter |
| Comfort | |
| Seat Type | 15" high-back seat |
| Armrests | Included |
| Seat Suspension | Seat spring |
| Seat Adjustment | Lever |
| Floor Mats | Grit |
| Steering Comfort | Soft Touch steering wheel |
| Additional Specifications | |
| Mulch Kit | Optional |
| Headlight(s) | 2 - LED |
| Discharge Chute | Included |
| Cup Holder | Included |
| Operator Presence System | Included |
| Bagger | Optional |
| Model Number | 13AZA1CN010 |
