Cub Cadet XT1 LT50 FAB
XT1 Enduro Series XT1 LT50 FAB
Overview:
• The Cub Cadet XT1 LT50 FAB is powered by a 24 hp KOHLER 7000 Series twin cylinder engine.
• 50-inch fabricated, 11-gauge, triple-blade AeroForce(TM) deck design that optimizes airflow and maximizes suction to reduce clumping during discharge and improves bagging performance while delivering the pristine Cub Cadet Si... + Read More
Features
Incredibly Responsive Handling
Optimized command and control at every turn with hydrostatic transmissions. No more shifting. Just push the pedal and go.
Advanced Cutting Performance
A muscular cutting system featuring stamped and fabricated cutting deck options that deliver an unprecedented level of bagging performance.
Versatility
The XT1 lawn tractors are engineered to support a wide variety of attachments for all-season versatility.
Specifications
| Engine | |
| Engine Brand | Kohler® |
| Engine Model | 7000 Series |
| Engine Model Number | KT735 |
| Engine Displacement | 725cc |
| Engine Output | 24 HP |
| Starter Type | Electric |
| Fuel Tank Capacity | 3 gal. |
| Cylinders | Twin |
| Engine Start | Ignition Key |
| Engine Oil Capacity | 2.0 qt. US (1.89 L) |
| Lubrication | Fully pressurized |
| Charging System | 12 amp regulated |
| Fuel Gauge | No |
| Governor | Mechanical |
| Choke | Choke-a-matic |
| Air Filter | Dual element |
| Oil Filter | Yes |
| Fuel Delivery | Carburetor |
| Battery | |
| Battery | 12V 230 cold crank amps |
| Battery Type | Standard Lead Acid |
| Battery Voltage | 12V |
| Drive System | |
| Transmission | Tuff Torq® K46 |
| Forward Speed | 5.5 MPH / 8.6 KMH |
| Reverse Speed | 3 MPH / 4.8 KMH |
| Rear Axle | 3/4" |
| Drive System | Hydrostatic |
| Transmission Control | Foot Pedal |
| Transmission Housing | Aluminum |
| Engine to Transmission | Heavy-duty belt |
| Rear Differntial Lock | No |
| Cutting Deck | |
| Deck Cutting Width | 50" in |
| Deck Wash | Yes |
| Deck Material | 11-gauge steel |
| Deck Engagement (PTO) | Electric |
| Deck Construction | Fabricated |
| Blade(s) | Three |
| Deck Lift | Hand Lever with spring-assist |
| Cutting Height Range | 1" - 4" |
| Anti-Scalping | Four gauge wheels plus roller |
| Deck Positions | 12 |
| Chassis | |
| Frame | Robotically welded |
| Turning Radius | 16" |
| Bumper | No |
| Rear Tow Hitch | Yes |
| Corrosion Protection | Yes |
| Front Pivot Bar | Cast Iron |
| Controls | |
| Cruise Control | Yes |
| Brakes | Disc |
| Comfort | |
| Seat Type | 15" high-back seat |
| Armrests | No |
| Seat adjustment | Lever |
| Floor Mats | Rubber |
| Wheels | |
| Bearing Type | Poly Bushing |
| Rear Tires | 20"x 8"-8" |
| Front Tires | 15"x 6"-6" |
| Tire Tread | Turf Saver |
| Additional Specifications | |
| Mulch Kit | Available Separately |
| Headlight(s) | Dual - LED |
| Cup Holder | Yes |
| Model Name | 13AQA1CL010 |
| Operator Presence System | Yes |
| Series | XT1® Enduro Series™ |
| Disclaimer | Specifications DisclaimerSpecifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website. |
