Cub Cadet XT1 LT46 EFI
XT1 Enduro Series XT1 LT46 EFI
Overview:
• The Cub Cadet XT1 LT46 EFI is powered by a Cub Cadet single cylinder 547cc engine equipped with EFI for 25% less fuel consumption, less maintenance, dependable starting, and easy off-season storage.
• 46-inch fabricated, 11-gauge, twin-blade deck with 12 cutting positions.
• Optimized steering system for responsive... + Read More
Features
Incredibly Responsive Handling
Optimized command and control at every turn with hydrostatic transmissions. No more shifting. Just push the pedal and go.
Advanced Cutting Performance
A muscular cutting system featuring stamped and fabricated cutting deck options that deliver an unprecedented level of bagging performance.
Versatility
The XT1 lawn tractors are engineered to support a wide variety of attachments for all-season versatility.
Specifications
| Engine | |
| Engine Brand | Cub Cadet |
| Engine Model | EFI Single Cylinder Engine |
| Engine Model Number | 9X90HUB |
| Engine Displacement | 547cc |
| Starter Type | Electric |
| Fuel Tank Capacity. | 2.5 gal |
| Cylinders/Material | Single |
| Engine Start | Push button start |
| Engine Oil Capacity | 1.8 qt. |
| Lubrication | Fully pressurized |
| Charging System | 15 amp regulated |
| Fuel Gauge | No |
| Governor | Mechanical |
| Choke | Electronic |
| Air Filter | Dual Element |
| Oil Filter | Yes |
| Fuel Delivery | Electronic Fuel Injection (EFI) |
| Battery | |
| Battery | 230 CCA |
| Battery Type | Standard Lead Acid |
| Battery Voltage | 12V |
| Drive System | |
| Transmission | Tuff Torq® K46 |
| Forward Speed | 5.5 MPH |
| Reverse Speed | 3.1 MPH |
| Rear Axle | 3/4" |
| Drive System | Hydrostatic |
| Transmission Control | Foot Pedal |
| Transmission Housing | Aluminum |
| Engine To Transmission | Heavy-Duty belt |
| Rear Differential Lock | No |
| Cutting Deck | |
| Deck Cutting Width | 46" in |
| Deck Wash | Yes |
| Deck Material | 11-gauge Steel |
| Deck Engagement (PTO) | Electric |
| Deck Construction | Fabricated |
| Blade(s) | Two |
| Deck Lift | Hand Lever with spring-assist |
| Cutting Height Range | 1" - 4" |
| Anti-Scalping | Four gauge wheels |
| Deck Positions | 12 |
| Chassis | |
| Frame | Robotically welded |
| Turning Radius | 16" |
| Bumper | No |
| Rear Tow Hitch | Yes |
| Corrosion Protection | Yes |
| Front Pivot Bar | Cast iron |
| Controls | |
| Cruise Control | Yes |
| Brakes | Disc |
| Display | Hour meter |
| Comfort | |
| Seat Type | 15" high-back seat |
| Armrests | No |
| Seat Suspension | Seat spring |
| Seat Adjustment | Lever |
| Floor Mats | Rubber |
| Wheels | |
| Bearing Type | Poly Pushing |
| Rear Tires | 20"x 8"-8" |
| Front Tires | 15"x 6"-6" |
| Tire Tread | Turf Saeer |
| Additional Specifications | |
| Mulch Kit | Available Separately |
| Headlight(s) | Dual - LED |
| Cup Holder | Yes |
| Operator Presence System | Yes |
| Model Number | 13B9A1CN010 |
| Series | XT1® Enduro Series™ |
| Disclaimer | Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website. |
