Cub Cadet XT1 LT42
XT1 Enduro Series XT1 LT42
Overview:
• The Cub Cadet XT1 LT42 is powered by a Kohler single cylinder 541 cc engine
• 42-inch stamped, 13-gauge, twin-blade deck with 12 cutting positions.
• Equipped with an optimized steering system for responsive handling to give a 16-inch turn radius a zero-turn feel.
• Ideal for mowing up to 1.5 acres of mostly flat ... + Read More
Features
Incredibly Responsive Handling
Optimized command and control at every turn with hydrostatic transmissions. No more shifting. Just push the pedal and go.
Advanced Cutting Performance
A muscular cutting system featuring stamped and fabricated cutting deck options that deliver an unprecedented level of bagging performance.
Versatility
The XT1 lawn tractors are engineered to support a wide variety of attachments for all-season versatility.
Specifications
| Engine | |
| Engine Brand | Kohler® |
| Engine Model | 5400 Series |
| Engine Model Number | KS540 |
| Engine Displacement | 541cc |
| Engine Output | 18HP |
| Starter Type | Electric |
| Fuel Tank Capacity | 3.0 gal. |
| Cylinders/Material | Single |
| Engine Start | Ignition Key |
| Engine Oil Capacity | 1.8 qts. |
| Lubrication | Fully pressurized |
| Charging System | 12 amp regulated |
| Fuel Gauge | No |
| Governor | Mechanical |
| Choke | Choke-a-matic |
| Air Filter | Dual element |
| Oil Filter | Yes |
| Fuel Delivery | Carburetor |
| Battery | |
| Baterry | 230 CCA |
| Battery Type | Standard Lead Acid |
| Battery Voltage | 12V |
| Drive System | |
| Transmission | Tuff Torq® TL-200 |
| Forward Speed | 5.5 MPH / 8.6 KMH |
| Reverse Speed | 3 MPH / 4.8 KMH |
| Rear Axle | 3/4" |
| Drive System | Hydrostatic |
| Transmission Control | Foot Pedal |
| Transmission Housing | Aluminum |
| Engine To Transmission | Heavy-duty belt |
| Rear Differential Lock | No |
| Cutting Deck | |
| Deck Cutting Width | 42" in |
| Deck Wash | Yes |
| Deck Material | 13-gauge steel |
| Deck Engagement (PTO) | Manual lever |
| Deck Construction | Stamped |
| Blade(s) | 2 |
| Deck Lift | Hand lever with spring-assist |
| Cutting Height Range | 1" - 4" |
| Anti-Scalping | Two gauge wheels |
| Deck Positions | 12 |
| Chassis | |
| Frame | Robotically welded |
| Turning Radius | 16" |
| Bumper | No |
| Rear Tow Hitch | Yes |
| Corrosion Protection | Yes |
| Front Pivot Bar | Cast Iron |
| Controls | |
| Cruise Control | Yes |
| Brakes | Disc |
| Comfort | |
| Seat Type | 15" high-back seat |
| Armrests | No |
| Seat Adjustment | Lever |
| Floor Mats | Rubber |
| Wheels | |
| Bearing Type | Poly Bushing |
| Rear Tires | 20"x 8"-8" |
| Front Tires | 15"x 6"-6" |
| Tire Tread | Turf Saver |
| Additional Specifications | |
| Mulch Kit | Available Separately |
| Headlight(s) | Dual - LED |
| Cup Holder | Yes |
| Operator Presence System | Yes |
| Model Number | 13AOA9CS010 |
| Series | XT1® Enduro Series™ |
| Disclaimer | Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website. |
