Case IH Farmall 80V Vineyard
Farmall V Series Farmall 80V Vineyard
Overview:
The Farmall® 80V offers a minimum width of 42.5 inches, to comfortably fit between vineyard rows. Available in Cab or Non-Cab configurations. Cab models feature high performance air filtration.
Features
Key Features for the Farmall V Series Tractor
- 3.4L turbocharged and aftercooled engine
- Minimum width between 42.5 inches and 49.0 inches (depending on tire size) to get through tight rows
- Minimum ground clearance 11.2 inches (285 mm)
- Cab isolation mounting provides a smooth comfortable ride for operators
- Convenient 16 x 16 power or mechanical shuttle transmission
Specifications
| Make | Case IH |
| Model | Farmall 80V Vineyard (2016-Present) |
| Engine Performance | |
| Advertised Engine Power, Rated, hp (kW) | 74 (55) |
| Maximum Engine Power, hp (kW) | Same as advertised |
| Rated Engine Speed, rpm | 2300 |
| Power Boost, hp (kW) | No boost |
| Fuel Tank capacity, gal (L) | 17.7 (67) |
| Diesel Exhaust Fluid (DEF) tank capacity, gal (L) | No DEF |
| PTO Performance | |
| PTO Horsepower, Basic / Optional Transmission, hp (kW) | 65 (48.5) |
| PTO Speeds, rpm | 540/540E std.; 540/1000 opt. |
| PTO operational Type (Independent; Live; Continuous) | Independent |
| Basic Engine | |
| Engine Make | Case IH FPT |
| Engine Model | 3.4 L |
| Number of Cylinders | 4 |
| Displacement, cu in (L) | 207 (3.4) |
| Engine Bore, in (mm) | 3.90 (99) |
| Engine Stroke, in (mm) | 4.33 (110) |
| Block Design, Replaceable Liners | Parent bore |
| Aspiration, Turbocharged or Naturally Aspirated | Turbocharged, air-to-air aftercooled |
| Fuel System | |
| Fuel System Description | High Pressure Common Rail |
| Fuel System Control, Electronic or Mechanical | Electronic |
| Fuel Injection to combustion chamber, Direct or Indirect | Direct |
| Emission and Exhaust Treatment | |
| Emission Level, US EPA Tier | Tier 4A (Interim) |
| Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) | No |
| Exhaust Gas Recirculation (EGR) | Cooled EGR |
| Cleanup Catalyst (CUC) | No |
| Diesel Oxidation Catalyst (DOC) | DOC standard |
| Diesel Particulate Filter (DPF) | DPF standard |
| Exhaust Pipe, Vertical stack or Horizontal | Horizontal |
| Cooling System | |
| Fan Drive Type | Belt |
| Electrical System | |
| System Rating, Volts | 12 |
| Alternator Rating, Amps | 120 |
| Basic Transmission Configuration | |
| Manufacturer's Description | 16x16 Mechanical Synchro Shuttle |
| Transmission Type | 4 synchronized speeds in 4 non-synchro ranges |
| Number of Forward / Reverse Speeds | 16F / 16R |
| Maximum Speed Forward, mph (kph) | 19 or 25 (30 or 40) |
| Creeper Range Available | 28x16 option |
| Shuttle (Forward-Reverse) Available | Yes, mechanical shuttle |
| Optional Transmission 1 | |
| Manufacturer's Description | 16 x16 Power Shuttle |
| Transmission Type | 4 synchronized speeds in 4 non-synchro ranges |
| Number of Forward / Reverse Speeds | 16F / 16R |
| Optional Transmission 2 | |
| Manufacturer's Description | 32 x 16 Dual Command |
| Transmission Type | Power shuttle w/ Hi/Lo |
| Number of Forward / Reverse Speeds | 32F / 16R |
| Wheel or Track Configuration | |
| Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks | 2WD / 4WD |
| Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer | Front Steer |
| Rear Axle Assembly | |
| Final Drive Location and Description | Planetary / Inboard |
| Axle Output End, Flange or Bar | Flange |
| Axle Bar Diameter, in (mm) | No bar axle |
| Front Axle | |
| Suspended Front Axle Available | No |
| Brakes | |
| Service Brake Type | Wet Disc |
| Hydraulic System | |
| Hydraulic System Type | Open Center |
| Main Hydraulic Pump Type | Gear, dual-pump |
| Implement Pump Flow, gpm (Lpm) | 16.9 (64) |
| Optional Pump Flow, gpm (Lpm) | 21.1 (80) cab only |
| Number of Standard Remote Valves | 2 or 3 rear; 2 mid |
| 3-Point Hitch Features | |
| 3-Point Hitch Category | Category 1 and 2 |
| Optional Hitch Category | No option |
| Draft Sensing or Lift Control | Mechanical or electronic draft control |
| Draft Link Ends Telescopic | Telescopic or claw style |
| 3-Point Hitch Lift Capacity | |
| Standard Lift Capacity 24 Inches behind pin, lb (kg) | 3,780 (1715) |
| Optional Lift Capacity 24 Inches behind pin, lb (kg) | No option |
| Standard Lift Capacity at lift pin, lb (kg) | 5,732 (2600) |
| Optional Lift Capacity at lift pin, lb (kg) | No option |
| Drawbar | |
| Drawbar Description | Swinging |
| Wheelbase / Trackbase | |
| Wheelbase, 2WD, in (mm) | 96 (2438) |
| Wheelbase/Trackbase, MFD/4WD or Track, in (mm) | 96 (2438) |
| Length | |
| Length, 2WD, incl. Hitch/Drawbar, in (mm) | np |
| Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) | 148.8 (3779) |
| Vertical Dimensions | |
| Height to Top of Cab, in (mm) | 91.7 (2329) |
| Height to Top of ROPS raised, in (mm) | 90 (2287) |
| Width w/Tires or Tracks | |
| Overall Width, with standard wheels or tracks, in (mm) | 42.5 to 49 (1079 to 1245) |
| Weight (w/Tires or Tracks) | |
| Weight, 2WD w/ROPS, lb (kg) | 5,108 (2317) |
| Weight, MFD/4WD w/ROPS, lb (kg) | 5,661 (2568) |
| Weight, 2WD w/Cab, lb (kg) | 5,421 (2459) |
| Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) | 5,975 (2710) |
| Weight, Total allowable, w/maximum ballast, lb (kg) | np |
| Tire / Track Size | |
| Front Tire Size, 2WD | 6.00-16, 8 PR F2 |
| Front Tire Size orTrack Width, MFD/4WD or Track | 8.0/75-15, 6 PR R1 |
| Rear Tire Size or Track Width | 11.2 R24 A8 |
| Sales Literature | |
| Literature Number | TA-1454-16 |
| Literature Date | 2/1/2016 |
| Secondary Literature Source | |
| Secondary Literature Number | -- |
| Secondary Literature Date | -- |
| Other Documentation | |
| Document Number | -- |
| Document Date | -- |
| Status and Entry Dates | |
| Manufacturing Status, Current or Archive | Current |
| First Entry Date | 2/27/2016 |
| Revision Date | -- |
| na = Not Applicable, np = Not Published | |
| UNCONTROLLED COPY |
