Case IH Farmall 110V Vineyard
Features
Key Features for the Farmall V Series Tractor
- 3.4L turbocharged and aftercooled engine
- Minimum width between 42.5 inches and 49.0 inches (depending on tire size) to get through tight rows
- Minimum ground clearance 11.2 inches (285 mm)
- Cab isolation mounting provides a smooth comfortable ride for operators
- Convenient 16 x 16 power or mechanical shuttle transmission
Specifications
Make | Case IH |
Model | Farmall 110V Vineyard (2016-Present) |
Engine Performance | |
Advertised Engine Power, Rated, hp (kW) | 106 (79) |
Maximum Engine Power, hp (kW) | Same as advertised |
Rated Engine Speed, rpm | 2300 |
Power Boost, hp (kW) | No boost |
Fuel Tank capacity, gal (L) | 17.7 (67) |
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) | No DEF |
PTO Performance | |
PTO Horsepower, Basic / Optional Transmission, hp (kW) | 93 (69.4) |
PTO Speeds, rpm | 540/540E std.; 540/1000 opt. |
PTO operational Type (Independent; Live; Continuous) | Independent |
Basic Engine | |
Engine Make | Case IH FPT |
Engine Model | 3.4 L |
Number of Cylinders | 4 |
Displacement, cu in (L) | 207 (3.4) |
Engine Bore, in (mm) | 3.90 (99) |
Engine Stroke, in (mm) | 4.33 (110) |
Block Design, Replaceable Liners | Parent bore |
Aspiration, Turbocharged or Naturally Aspirated | Turbocharged, air-to-air aftercooled |
Fuel System | |
Fuel System Description | High Pressure Common Rail |
Fuel System Control, Electronic or Mechanical | Electronic |
Fuel Injection to combustion chamber, Direct or Indirect | Direct |
Emission and Exhaust Treatment | |
Emission Level, US EPA Tier | Tier 4A (Interim) |
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) | No |
Exhaust Gas Recirculation (EGR) | Cooled EGR |
Cleanup Catalyst (CUC) | No |
Diesel Oxidation Catalyst (DOC) | DOC standard |
Diesel Particulate Filter (DPF) | DPF standard |
Exhaust Pipe, Vertical stack or Horizontal | Horizontal |
Cooling System | |
Fan Drive Type | Belt |
Electrical System | |
System Rating, Volts | 12 |
Alternator Rating, Amps | 120 |
Basic Transmission Configuration | |
Manufacturer's Description | 16x16 Mechanical Synchro Shuttle |
Transmission Type | 4 synchronized speeds in 4 non-synchro ranges |
Number of Forward / Reverse Speeds | 16F / 16R |
Maximum Speed Forward, mph (kph) | 19 or 25 (30 or 40) |
Creeper Range Available | 28x16 option |
Shuttle (Forward-Reverse) Available | Yes, mechanical shuttle |
Optional Transmission 1 | |
Manufacturer's Description | 16 x16 Power Shuttle |
Transmission Type | 4 synchronized speeds in 4 non-synchro ranges |
Number of Forward / Reverse Speeds | 16F / 16R |
Optional Transmission 2 | |
Manufacturer's Description | 32 x 16 Dual Command |
Transmission Type | Power shuttle w/ Hi/Lo |
Number of Forward / Reverse Speeds | 32F / 16R |
Wheel or Track Configuration | |
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks | 2WD / 4WD |
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer | Front Steer |
Rear Axle Assembly | |
Final Drive Location and Description | Planetary / Inboard |
Axle Output End, Flange or Bar | Flange |
Axle Bar Diameter, in (mm) | No bar axle |
Front Axle | |
Suspended Front Axle Available | No |
Brakes | |
Service Brake Type | Wet Disc |
Hydraulic System | |
Hydraulic System Type | Open Center |
Main Hydraulic Pump Type | Gear, dual-pump |
Implement Pump Flow, gpm (Lpm) | 16.9 (64) |
Optional Pump Flow, gpm (Lpm) | 21.1 (80) cab only |
Number of Standard Remote Valves | 2 or 3 rear; 2 mid |
3-Point Hitch Features | |
3-Point Hitch Category | Category 1 and 2 |
Optional Hitch Category | No option |
Draft Sensing or Lift Control | Mechanical or electronic draft control |
Draft Link Ends Telescopic | Telescopic or claw style |
3-Point Hitch Lift Capacity | |
Standard Lift Capacity 24 Inches behind pin, lb (kg) | 3,780 (1715) |
Optional Lift Capacity 24 Inches behind pin, lb (kg) | No option |
Standard Lift Capacity at lift pin, lb (kg) | 5,732 (2600) |
Optional Lift Capacity at lift pin, lb (kg) | No option |
Drawbar | |
Drawbar Description | Swinging |
Wheelbase / Trackbase | |
Wheelbase, 2WD, in (mm) | 96 (2438) |
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) | 96 (2438) |
Length | |
Length, 2WD, incl. Hitch/Drawbar, in (mm) | np |
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) | 148.8 (3779) |
Vertical Dimensions | |
Height to Top of Cab, in (mm) | 91.7 (2329) |
Height to Top of ROPS raised, in (mm) | 90 (2287) |
Width w/Tires or Tracks | |
Overall Width, with standard wheels or tracks, in (mm) | 42.5 to 49 (1079 to 1245) |
Weight (w/Tires or Tracks) | |
Weight, 2WD w/ROPS, lb (kg) | 5,307 (2407) |
Weight, MFD/4WD w/ROPS, lb (kg) | 5,877 (2666) |
Weight, 2WD w/Cab, lb (kg) | 5,580 (2531) |
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) | 6,151 (2790) |
Weight, Total allowable, w/maximum ballast, lb (kg) | np |
Tire / Track Size | |
Front Tire Size, 2WD | 6.00-16, 8 PR F2 |
Front Tire Size orTrack Width, MFD/4WD or Track | 8.0/75-15, 6 PR R1 |
Rear Tire Size or Track Width | 11.2 R24 A8 |
Sales Literature | |
Literature Number | TA-1454-16 |
Literature Date | 2/1/2016 |
Secondary Literature Source | |
Secondary Literature Number | -- |
Secondary Literature Date | -- |
Other Documentation | |
Document Number | -- |
Document Date | -- |
Status and Entry Dates | |
Manufacturing Status, Current or Archive | Current |
First Entry Date | 2/27/2016 |
Revision Date | -- |
na = Not Applicable, np = Not Published | |
UNCONTROLLED COPY |