Land Pride BSR10
BSR10 Series Bale Spears BSR10
Overview:
The BSR10 is a 3-Point Cat I or Cat II Bale Spear intended for moving bales up to 1,800 lbs. It features a single, forged 49” steel spear with a 44” usable length mounted to a 3” x 3” tube frame. To keep the bale from rolling, the BSR10 also has two replaceable 19” stabilizer spikes.
Features
| Features | Benefits |
| Designed to fit Cat.I & Cat. II 3-Point hitches | Works well with a lot of tractors |
| 3-point is Quick Hitch compatible | Easy to hook-up and unhook with a Quick Hitch. Bale Spear must be supported on blocks to use the Quick Hitch. |
| Replaceable spear and spikes | Spears and spikes are easily replaced if damaged. |
| Bales can be pushed with a single spear | Good for pushing bales onto side dump trailers. |
| Spear punches a hole in end of bale not in the circumference | Very little moisture can enter the bale where spears punch. Grappling type bale lifts punch holes in the circumference allowing moisture to penetrate the bale and accelerates bale deterioration |
| Single spear includes two short bale spikes | Bale spikes keep bale from rotating on the single spear. |
| Single spear takes less force to push the spear into the bale | Bales of all sizes won't shift positions as easily while pushing the spear into the bale. Single spears are ideal for lifting smaller lighter bales. |
Specifications
| Model | BSR10 |
| Frame lift capacity 24" from face of frame |
1 - Round bale up to 2,000 lbs |
| 3-Point hitch category | Cat. I & Cat. II |
| Quick Hitch Compatible | Yes, if Bale Spear is supported on blocks. |
| Spear diameter | 1 3/4" |
| Number of spears | 1 |
| Spear overall length | 49" |
| Spear probe length Face of frame to end of point |
44 1/2" |
| Weight of unit | 112 lbs. |
| Number of spikes | 2 |
| Spike diameter and probe length | 1 1/4" |
| Spike probe length Face of frame to end of point |
14" |
