Land Pride SSG2524
SSG25 Series Stump Grinders SSG2524
Overview:
Kubota by Land Pride: A great choice for contractors, landscapers, and forestry departments, the SSG2524 Stump Grinder turns large stumps into small chips. It features durable carbide teeth mounted to a 1/2" cutting wheel that spins up to 1,100 rpm. Fully controllable from inside the cab, this unit has a maximum cuttin... + Read More
Features
| Features | Benefits |
| Universal quick attach mounting system | For quick and easy attachment. |
| 8" Digging depth | A good depth below the ground. Removes base of most trees. |
| Adjustable skid shoes | Adjustable to fit all sizes of skid steers. |
| Pivoting discharge deflector | Discharge deflector pivots up while cutting wheel is digging into the ground. |
| Welded on serrated step | Good safe step for accessing skid steer operator's seat. |
| High-speed cutting wheel | Cuts faster with less vibration. |
| Permanent hose holders | Hoses aren't zip-tied to the frame. Zip ties can break over time. |
| Replaceable carbide cutting teeth | Cutting teeth are easy to replace. Carbide tips for extra long life. |
| Hydraulic hose lines | Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration. |
| Case drain hydraulic line | Protects against component damage. |
| Keyed, tapered spindle on end of hydraulic motor |
Able to draw cutting wheel tight against the tapered shaft providing an excellent fit-up and less likely to shear the key off. |
| Cutting wheel designed with wheel puller access holes | Makes it easier to pull the cutting wheel off of the motor spindle. |
| Attached rain tight manual holding tube | Keeps manual with stump grinder for quick easy access. Manual won't get wet. |
| Offset articulating arm | Allow for optimum line-of-site from operator's seat |
Specifications
| Specifications & Capacities | SSG2524 |
| Mounting Plate | Quick Attach |
| Main Frame | 6 x 6 x 1/4 (152 x 152 x 6) Tube |
| Overall Mounting Width | 48 (1.22) |
| Overall Length | 60 (1.52) |
| Overall Weight | 540 (244.9) |
| Drive And Control System | Hydraulic motor with electric over hydraulic |
| Hydraulic Requirements | 17 to 32 (64.4 to 121.1) |
| Cutting Wheel Speed | 470 to 875 rpm |
| Articulate Cylinder | 3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia. |
| Tilt Cylinder | 3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia. |
| Hydraulic Lines & Hoses | 3/4 (19) I.D. Hydraulic hoses with crimp on cordura sleeve 1/4 (6) I.D. Case drain hydraulic hose |
| Number of Cutting Teeth Straight Left-Hand Right-Hand |
8 - Replaceable carbide teeth 12 - Replaceable carbide teeth 12 - Replaceable carbide teeth |
| Cutting Arc | 55 Degrees |
| Maximum Cutting Depth Below Ground | 8 (20.3) |
| Greasable Hinge Points | Yes |
| Color | Black |
| Outside Cutting Wheel Diameter | 23 3/4 (60.3) |
| Cutting Wheel Thickness | 1/2 (13) |
| Maximum Pressure Rating | 3500 (24.1) |
